Select Category
All Blog Events News Recognitions

Featured Post

News

KLH Engineers, Trimble Collaborate on New SysQue Tool

09.09.21 Kohrs Lonnemann Heil Engineers, Inc. (KLH Engineers) is pleased to announce an exciting collaboration with Trimble that resulted in the development of the new SysQue Model Manager tool. The SysQue Model Manager provides a simple step-by-step method to ‘standardize’ project setup and deliverables. Consistent/Standardized models lead to a more productive SysQue environment and result in […] Read more
Events

Stephen Federle to Deliver Keynote Address at 2020 ACI Technology Expo

08.28.20 Stephen Federle, PE, P. Eng., LEED AP, CEM, Principal and Director of Engineering at Kohrs Lonnemann Heil Engineers, Inc. (KLH Engineers), will be delivering the keynote address at the 2020 Allied Construction Industries (ACI) Technology and Innovation Expo on Tuesday, Sept. 1. This virtual event will showcase the latest trends in technology and innovation and […] Read more Events

Patrick Fernbach Presenting at MEP Force

08.26.20 Patrick Fernbach, Lead Mechanical Engineering Associate and Software Engineer at Kohrs Lonnemann Heil Engineers, Inc. (KLH Engineers), will present in two sessions at MEP Force, the only virtual conference focused on mechanical, electrical and plumbing engineering. Starting Aug. 31 through Sept. 2, 2020, the conference connects over 700 attendees and has approximately 80 breakout sessions […] Read more Blog

Case Study: Converting AutoCAD Layers to Revit with Machine Learning

07.16.20 Many industries have embraced machine learning to solve a variety of problems. As a mechanical, electrical and plumbing engineering consulting firm that does 100 percent of its designs in Revit, Kohrs Lonnemann Heil Engineers, Inc. (KLH Engineers) was manually converting its clients’ 2D AutoCAD models to 3D Revit models. Utilizing this historical data, KLH Engineers […] Read more News

HVAC Strategies to Improve Indoor Air Quality in a Post-Coronavirus World

06.30.20 Indoor air quality is becoming more paramount in all types of facilities in light of the Coronavirus Disease 2019 (COVID-19) pandemic. Read more Blog

Employee Spotlight: Amanda Schmitt, Mechanical Engineering Associate

04.28.20 Amanda Schmitt, Mechanical Engineering Associate, began at KLH as a co-op student in 2015 and became a full-time employee in 2018. She has completed projects of all types including fit-outs, new construction, upgrades, expansions and shell buildings in the civic, hospitality, lifestyle and retail markets. Her expertise within the mechanical discipline includes HVAC, plumbing and […] Read more Blog

Employee Spotlight: Nathan Lewis, Education Studio Director

03.30.20 Nathan Lewis was recently named Education Studio Director at KLH Engineers. He joined the firm in 2009 where he started as a Senior Electrical Designer. From there, he took on a Project Management role in the Education Studio which eventually led him to where he is today. How did you get into the Architectural/Engineering/Construction (AEC) […] Read more News

COVID-19: A Call to Action

03.20.20 KLH Engineers has joined numerous businesses throughout the United States and beyond that has adjusted its work procedures in response to the COVID-19 outbreak. We are following the advice of our local, state and federal leadership to help prevent the spread of the virus. We empathize with so many of you as our normal way […] Read more Blog

Budget Briefing: Kentucky Can Do More with AEC Industry Changes

03.03.20 Multiple industry resources and publications indicate there is, on average, 30 percent waste on a typical construction project. The causes of this waste include underutilized talent, excessive waiting and scheduling delays, overproduction, rework and defects, to mention a few. This causes building owners to pay far too much for the inefficiencies that occur along the […] Read more Events

KLH to Showcase Custom Software Tools at Cincinnati BIM User Group

02.24.20 KLH Engineers (KLH) will present several custom software tools at the Cincinnati BIM User Group on Thursday, February 27, 2020. The meeting will be held at Elevar Design Group located at 555 Carr Street in Cincinnati, Ohio. The tools developed by KLH aid in bridging the gaps both within and outside of the design phase […] Read more